搜索 Your location/language China ( 中国 ), Chinese (中文)
Shell-Type Cases 壳状盒

Shell-Type Cases 壳状盒

通用仪器盒

Shell-Type Cases 壳状盒产品系列提供不同的大小规格、高度和类型。请选择满足您独特要求的机盒!

  • 3 种类型 51 款式机盒:
    类型 V – 端面敞开,后面封闭
    类型 O – 端面敞开,后面敞开
    类型 G – 端面封闭,后面封闭
  • 由于周向榫槽连接达到高度稳定性
  • 导槽用于垂直安装分隔板和电路板
  • 上盒和下盒都设有安装用固定柱
  • 前面板和后面板为铝材质或红色 PMMA (有机玻璃®)作为附件
  • 带适配 4 个 AA, 2 个 AA, 1 个 9 V 或 2 个 9 V 电池的电池仓的类型可选(类型 V 和 G)
  • 封闭式类型 (类型 G) 也可带有凹陷的操作面板,以保护膜键盘
  • 使用密封套件(附件)时,不带电池仓的封闭型(G 型)防护等级达到 IP 65
  • EMC: 根据要求,您可以选择镀铝的机盒; 通过提供的接触板条(附件)达到改善接触效果
  • 墙壁安装片或墙壁支架设置套件作为附件
  • 通过增加通用附件达到附加功能
  • 应用示例

应用范围

  • 测量调控技术,控制技术
  • 医疗和实验室技术
  • 外围设备和接口设备
  • 开关设施和调制解调器
  • 类型
  • 配件
  • 按客户要求修改加工

选择类型和规格大小,然后点击“选择”。

 

V 型(端面敞开,后面封闭)

SHELL-TYPE CASE V 型(端面敞开,后面封闭)

O 型(端面和后面敞开)

SHELL-TYPE CASE O 型(端面和后面敞开)

G 型(端面和后面敞开)

SHELL-TYPE CASE G 型(端面和后面敞开)

A0306031 Self-tapping screws 3 x 6 mm (PZ1)

A0306031

Self-tapping screws 3 x 6 mm (PZ1) Self-tapping crosshead screw (PZ1), specifically suitable for plastics. For fastenings components, boards and PCBs onto pillars.
For correct assembly please note the tightening torque depends on enclosure type. View list (.xls) >>

Supply 1 self-tapping screw

关闭

A0306031

Self-tapping screws 3 x 6 mm (PZ1)
A9100001 Ring eyelet

A9100001

Ring eyelet For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 3 mm, location hole ø 4 mm required.

Supply 1 ring eyelet

关闭

A9100001

Ring eyelet PA 6
volcano
A9100002 Ring eyelet

A9100002

Ring eyelet For universal use. For threading in hand straps and the like. Simple installation with locking hook. Inside ring diameter 2.5 mm, max. wall thickness 4 mm, location hole ø 5 mm required.

Supply 1 ring eyelet

关闭

A9100002

Ring eyelet PA 6
volcano
A9104073 Contact-strips V, G 85

A9104073

Contact-strips V, G 85 Provide additional electrical continuity between the top and base shells of shielded cases (order two pieces, one for each side).

Supply 1 contact-strip

关闭

A9104073

Contact-strips V, G 85 Aluminium
A9104111 Front / rear panel

A9104111

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940433.

Supply 1 front panel

关闭

A9104111

Front / rear panel Aluminium
matt anodised
36x14.6x1mm
A9104113 Front / rear panel

A9104113

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940433.

Supply 1 front panel

关闭

A9104113

Front / rear panel Acrylglas
red transparent
36x14.6x1mm
A9104250 Sealing kit G 85

A9104250

Sealing kit G 85 Inlay O-ring and four rubber disks seal the tongue and groove joint and the four assembly kits.

Supply 1 O-ring, 4 rubber disks

关闭

A9104250

Sealing kit G 85
A9106095 Contact-strips V, G 110

A9106095

Contact-strips V, G 110 Provide additional electrical continuity between the top and base shells of shielded cases (order two pieces, one for each side).

Supply 1 contact-strip

关闭

A9106095

Contact-strips V, G 110 Aluminium
A9106113 Front / rear panel

A9106113

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940633.

Supply 1 front panel

关闭

A9106113

Front / rear panel Acrylglas
red transparent
59.3x25x1mm
A9106123 Front / rear panel

A9106123

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940634.

Supply 1 front panel

关闭

A9106123

Front / rear panel Acrylglas
red transparent
59.3x37x1mm
A9106223 Front / rear panel

A9106223

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940644.

Supply 1 front panel

关闭

A9106223

Front / rear panel Acrylglas
red transparent
59.3x49x1mm
A9106352 Sealing kit G 110

A9106352

Sealing kit G 110 Inlay O-ring and four rubber disks seal the tongue and groove joint and the four assembly kits.

Supply 1 O-ring, 4 rubber disks

关闭

A9106352

Sealing kit G 110
A9107111 Front / rear panel

A9107111

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940633.

Supply 1 front panel

关闭

A9107111

Front / rear panel Aluminium
matt anodised
59.3x25x1mm
A9107121 Front / rear panel

A9107121

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940634.

Supply 1 front panel

关闭

A9107121

Front / rear panel Aluminium
matt anodised
59.3x37x1mm
A9107221 Front / rear panel

A9107221

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940644.

Supply 1 front panel

关闭

A9107221

Front / rear panel Aluminium
matt anodised
59.3x49x1mm
A9108113 Front / rear panel

A9108113

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940833.

Supply 1 front panel

关闭

A9108113

Front / rear panel Acrylglas
red transparent
81.9x23.6x1mm
A9108120 Contact-strips V, O, G 155

A9108120

Contact-strips V, O, G 155 Provide additional electrical continuity between the top and base shells of shielded cases (order two pieces, one for each side).

Supply 1 contact-strip

关闭

A9108120

Contact-strips V, O, G 155 Aluminium
A9108123 Front / rear panel

A9108123

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940834.

Supply 1 front panel

关闭

A9108123

Front / rear panel Acrylglas
red transparent
81.9x35.6x1mm
A9108223 Front / rear panel

A9108223

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940844.

Supply 1 front panel

关闭

A9108223

Front / rear panel Acrylglas
red transparent
81.9x47.6x1mm
A9108486 Sealing kit G 155

A9108486

Sealing kit G 155 Inlay O-ring and four rubber disks seal the tongue and groove joint and the four assembly kits.

Supply 1 O-ring, 4 rubber disks

关闭

A9108486

Sealing kit G 155
A9109111 Front / rear panel

A9109111

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940833.

Supply 1 front panel

关闭

A9109111

Front / rear panel Aluminium
matt anodised
81.9x23.6x1mm
A9109121 Front / rear panel

A9109121

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940834.

Supply 1 front panel

关闭

A9109121

Front / rear panel Aluminium
matt anodised
81.9x35.6x1mm
A9109221 Front / rear panel

A9109221

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A940844.

Supply 1 front panel

关闭

A9109221

Front / rear panel Aluminium
matt anodised
81.9x47.6x1mm
A9113113 Front / rear panel

A9113113

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A941333.

Supply 1 front panel

关闭

A9113113

Front / rear panel Acrylglas
red transparent
124.2x33.6x1.5mm
A9113123 Front / rear panel

A9113123

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A941334.

Supply 1 front panel

关闭

A9113123

Front / rear panel Acrylglas
red transparent
124.2x56.6x1.5mm
A9113150 Contact-strips V, O, G 190

A9113150

Contact-strips V, O, G 190 Provide additional electrical continuity between the top and base shells of shielded cases (order two pieces, one for each side).

Supply 1 contact-strip

关闭

A9113150

Contact-strips V, O, G 190 Aluminium
A9113223 Front / rear panel

A9113223

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A941344.

Supply 1 front panel

关闭

A9113223

Front / rear panel Acrylglas
red transparent
124.2x79.6x1.5mm
A9113630 Sealing kit G 190

A9113630

Sealing kit G 190 Inlay O-ring and four rubber disks seal the tongue and groove joint and the four assembly kits.

Supply 1 O-ring, 4 rubber disks

关闭

A9113630

Sealing kit G 190
A9114111 Front / rear panel

A9114111

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A941333.

Supply 1 front panel

关闭

A9114111

Front / rear panel Aluminium
matt anodised
124.2x33.6x1.5mm
A9114121 Front / rear panel

A9114121

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A941334.

Supply 1 front panel

关闭

A9114121

Front / rear panel Aluminium
matt anodised
124.2x56.6x1.5mm
A9114221 Front / rear panel

A9114221

Front / rear panel Front panel for SHELL-TYPE CASE V and O. For case A941344.

Supply 1 front panel

关闭

A9114221

Front / rear panel Aluminium
matt anodised
124.2x79.6x1.5mm
A9160003 Plug-in contact, 1 x 9 V (PP3)

A9160003

Plug-in contact, 1 x 9 V (PP3) Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).

Supply 1 plug-in contact

关闭

A9160003

Plug-in contact, 1 x 9 V (PP3)
A9172107 Belt/Pocket clip

A9172107

Belt/Pocket clip Universal clip. Fixing in two location holes (bore distance 20 mm, 2 x diameter = 4.2 mm).
Application: DATEC-POCKET-BOX L/M/S (fixing already considered), SHELL-TYPE CASES 85 and 110, FLAT-PACK CASE N 100.

Supply 1 belt/pocket clip, assembly kit

关闭

A9172107

Belt/Pocket clip ABS (UL 94 HB)
off-white RAL 9002
62x30mm
A9190013 Set of battery clips, 4 x AA

A9190013

Set of battery clips, 4 x AA For contacting the batteries. Comply with DIN EN 60601. The modified geometry rules out the possibility of a short circuit when inserting the batteries incorrectly.

Supply 1 double contacts right, 2 double contact left, 1 single contact positive, 1 single contact negative

关闭

A9190013

Set of battery clips, 4 x AA Steel
nickel-plated
A9190014 Set of battery clips, 2 x AA

A9190014

Set of battery clips, 2 x AA For contacting the batteries. Comply with DIN EN 60601. The modified geometry rules out the possibility of a short circuit when inserting the batteries incorrectly.

Supply 1 double contact left, 1 single contact positive, 1 single contact negative

关闭

A9190014

Set of battery clips, 2 x AA Steel
nickel-plated
A9204108 Wall mounting brackets

A9204108

Wall mounting brackets Exterior wall mounting elements for the SHELL-TYPE CASES 110, 155 and 190. Fastening to the case by means of the case fixing screws.

Supply 4 wall mounting brackets

关闭

A9204108

Wall mounting brackets PA 6
pebble grey RAL 7032
A9207150 Anti-slide feet 6.5 x 2 mm

A9207150

Anti-slide feet 6.5 x 2 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

关闭

A9207150

Anti-slide feet 6.5 x 2 mm transparent
A9210290 Anti-slide feet 9.5 x 3.8 mm

A9210290

Anti-slide feet 9.5 x 3.8 mm Rubber feet with self-adhesive foil facilitate a secure position.

Supply 2 rubber feet

关闭

A9210290

Anti-slide feet 9.5 x 3.8 mm transparent
A9250250 Battery spacer

A9250250

Battery spacer The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.

Supply 1 spacer

关闭

A9250250

Battery spacer PE foam
50x25x4mm
A9250807 Tilt foot bar

A9250807

Tilt foot bar Facilitates ergonomical reading angles, side lenght 81 mm (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a better grip.

Supply 1 tilt foot bar, assembly kit

关闭

A9250807

Tilt foot bar ABS (UL 94 HB)
off-white RAL 9002
A9250817 Tilt foot bar

A9250817

Tilt foot bar Facilitates ergonomical reading angles, side lenght 43 mm (bore distance 20 mm, 2 x diameter = 4.2 mm). We recommend rubber feet (A9207150) for a better grip.

Supply 1 tilt foot bar, assembly kit

关闭

A9250817

Tilt foot bar ABS (UL 94 HB)
off-white RAL 9002
B1350048 Wall suspension elements

B1350048

Wall suspension elements Two-part construction. The adapter is screwed down together with the base part of the case. Due to preshaped pockets, each case can be quickly and securely unlatched from the wall suspension element.

Supply 1 wall suspension element, 1 adapter 50 x 100 mm, assembly kit

关闭

B1350048

Wall suspension elements ABS (UL 94 HB)
pebble grey RAL 7032
B1360048 Wall suspension elements

B1360048

Wall suspension elements Two-part construction. The adapter is screwed down together with the base part of the case. Due to preshaped pockets, each case can be quickly and securely unlatched from the wall suspension element.

Supply 1 wall suspension element, 1 adapter 58 x 128 mm, assembly kit

关闭

B1360048

Wall suspension elements ABS (UL 94 HB)
pebble grey RAL 7032

产品类型用于 Shell-Type Cases 壳状盒

如何体现您的特殊产品? 如有需要,我们执行所有必要的修改和精加工,提供组装完毕的机盒。