搜索 Your location/language China ( 中国 ), Chinese (中文)
Hand-Terminal 手持终端盒

Hand-Terminal 手持终端盒

机械、设备控制用移动式控制盒 & 室外用

手持式界面终端盒特别适用于有坚固外壳要求的电子元组件的封装。

  • 耐火、耐冲击材料
  • 坚固及密封,防护等级至 IP 65,密封件作为附件
  • 充足的空间用于操作元件、显示器、电子设备、紧急停止和启用按钮
  • 符合人体工程学的手柄区使持握舒适
  • 带线使用或带适配 4 个 AA, 1 个 9 V 或 2 个 9 V 电池的电池仓
  • 最佳重量分布
  • 操作区域凹陷,以保护膜键盘
  • 型号 I 的上盖是封闭式
  • 型号 II 用于前面板安装式
  • 固定柱用于安装电路板和安装组件
  • 应用示例

应用范围

  • 用于生产机器和组装机器的灵活控制
  • 界面终端盒具备示教功能
  • 也提供电气和电子工程领域的经典应用
  • 例如测量和控制领域等
  • 类型
  • 配件
  • 按客户要求修改加工

选择类型和规格大小,然后点击“选择”。

 

封闭 式上盒

HAND-TERMINAL 封闭 式上盒

适配前面板安装式

HAND-TERMINAL 适配前面板安装式

A9146101 Front panel

A9146101

Front panel For HAND-TERMINAL version II. Front panel installation at the top part from the rear.

Supply 1 front panel (srews supplied with the case)

关闭

A9146101

Front panel Aluminium
matt anodised
179x88x2mm
A9146106 Sealing kit

A9146106

Sealing kit For the case. For a higher protection class. Attention: for HAND-TERMINAL version II with frame cover for inserting an aluminium front panel additionally sealing A9146206 for the front panel necessary.

Supply 1 sealing kit

关闭

A9146106

Sealing kit
A9146206 Sealing

A9146206

Sealing For the front panel of HAND-TERMINAL version II. For a higher protection class.

Supply 1 sealing

关闭

A9146206

Sealing
A9160003 Plug-in contact, 1 x 9 V (PP3)

A9160003

Plug-in contact, 1 x 9 V (PP3) Version: Lateral cable exit. Cable length approx. 100 mm. Diameter of contacts = 5.7/5.3 mm.
Application: for a 9 V flat battery (PP3).

Supply 1 plug-in contact

关闭

A9160003

Plug-in contact, 1 x 9 V (PP3)
A9161002 Set of battery clips, 2 x 9 V or 4 x AA

A9161002

Set of battery clips, 2 x 9 V or 4 x AA For contacting the batteries 2 x 9 V.
Note application DATEC-MOBIL-BOX L with battery compartment: only for this enclosure 2 x 9 V or 4 x AA is possible.

Supply 4 single contacts

关闭

A9161002

Set of battery clips, 2 x 9 V or 4 x AA Steel
tin-plated
A9174002 Battery compartment, 2 x 9 V

A9174002

Battery compartment, 2 x 9 V Application: for 2 x 9 V flat batteries (PP3).

Supply 1 battery compartment, assembly kit

关闭

A9174002

Battery compartment, 2 x 9 V ABS (UL 94 HB)
off-white RAL 9002
A9174003 Battery compartment, 1 x 9 V

A9174003

Battery compartment, 1 x 9 V Application: for 1 x 9 V flat battery (PP3).

Supply 1 battery compartment, assembly kit

关闭

A9174003

Battery compartment, 1 x 9 V ABS (UL 94 HB)
off-white RAL 9002
A9174006 Set of battery clips, 1 x 9 V

A9174006

Set of battery clips, 1 x 9 V For contacting the battery.

Supply 2 single contacts

关闭

A9174006

Set of battery clips, 1 x 9 V Steel
tin-plated
A9250250 Battery spacer

A9250250

Battery spacer The self-adhesive spacer provides mignon cells with safe support in all battery compartments which can also be used for 9 V flat batteries.
Application: DATEC-MOBIL-BOX S, DATEC-CONTROL XS, HAND-TERMINAL, LUX-CASES 150 and 190, SHELL-TYPE CASES vers. III and IV, HAND-HELD-BOX N.

Supply 1 spacer

关闭

A9250250

Battery spacer PE foam
50x25x4mm
A9345217 Set of battery compartment, 4 x AA

A9345217

Set of battery compartment, 4 x AA For 4 x 1.5 V mignon-cells (AA). Complies with DIN EN 60601 (short circuit caused by incorrect insertion of batteries impossible).

Supply 1 battery compartment, battery clips nickel-plated, assembly kit

关闭

A9345217

Set of battery compartment, 4 x AA ABS (UL 94 HB)
off-white RAL 9002

产品类型用于 Hand-Terminal 手持终端盒

如何体现您的特殊产品? 如有需要,我们执行所有必要的修改和精加工,提供组装完毕的机盒。