DIN 标准导轨接线盒
添加到购物车内 
C0080801
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0080801
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
80x80x20mm
C0080802
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0080802
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
80x80x20mm
C0081201
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081201
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
120x80x20mm
C0081202
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081202
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
120x80x20mm
C0081601
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081601
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
160x80x20mm
C0081602
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081602
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
160x80x20mm
C0082401
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0082401
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
240x80x20mm
C0082402
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0082402
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
240x80x20mm
C0121201
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0121201
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
120x120x30mm
C0121202
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0121202
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
120x120x30mm
C0122001
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122001
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
200x120x30mm
C0122002
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122002
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
200x120x30mm
C0122401
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122401
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
240x120x30mm
C0122402
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122402
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
240x120x30mm
C0161601
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0161601
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
160x160x30mm
C0161602
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0161602
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
160x160x30mm
C0162401
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0162401
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
240x160x30mm
C0162402
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part.´Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0162402
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
240x160x30mm
C1080801
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1080801
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
80x80x40mm
C1080802
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1080802
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
80x80x40mm
C1081201
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081201
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
120x80x40mm
C1081202
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081202
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
120x80x40mm
C1081601
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081601
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
160x80x40mm
C1081602
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081602
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
160x80x40mm
C1082401
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1082401
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
240x80x40mm
C1082402
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1082402
Case shell 80, with tongue产品已添加到关注清单中
light grey RAL 7035
240x80x40mm
C1121201
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1121201
Case shell 120, with groove产品已添加到关注清单中
light grey RAL 7035
120x120x30mm
C1121202
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1121202
Case shell 120, with groove产品已添加到关注清单中
light grey RAL 7035
120x120x30mm
C1122001
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122001
Case shell 120, with groove产品已添加到关注清单中
light grey RAL 7035
200x120x30mm
C1122002
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122002
Case shell 120, with groove产品已添加到关注清单中
light grey RAL 7035
200x120x30mm
C1122401
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122401
Case shell 120, with groove产品已添加到关注清单中
light grey RAL 7035
240x120x30mm
C1122402
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122402
Case shell 120, with groove产品已添加到关注清单中
light grey RAL 7035
240x120x30mm
C1161601
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1161601
Case shell 160, with groove产品已添加到关注清单中
light grey RAL 7035
160x160x30mm
C1161602
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1161602
Case shell 160, with groove产品已添加到关注清单中
light grey RAL 7035
160x160x30mm
C1162401
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1162401
Case shell 160, with groove产品已添加到关注清单中
light grey RAL 7035
240x160x30mm
C1162402
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1162402
Case shell 160, with groove产品已添加到关注清单中
light grey RAL 7035
240x160x30mm
C1203001
Case shell 200, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1203001
Case shell 200, with tongue产品已添加到关注清单中
light grey RAL 7035
300x200x40mm
C1243601
Case shell 240, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1243601
Case shell 240, with tongue产品已添加到关注清单中
light grey RAL 7035
360x240x40mm
C2008081
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealeing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008081
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
80x80x60mm
C2008082
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008082
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
80x80x60mm
C2008121
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008121
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
120x80x60mm
C2008122
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008122
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
120x80x60mm
C2008161
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008161
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
160x80x60mm
C2008162
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008162
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
160x80x60mm
C2008241
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008241
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x80x60mm
C2008242
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008242
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
240x80x60mm
C2012121
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012121
ROBUST-BOX WIDTH 120, Vers. I产品已添加到关注清单中
light grey RAL 7035
120x120x60mm
C2012122
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012122
ROBUST-BOX WIDTH 120, Vers. II产品已添加到关注清单中
light grey RAL 7035
120x120x60mm
C2012201
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012201
ROBUST-BOX WIDTH 120, Vers. I产品已添加到关注清单中
light grey RAL 7035
200x120x60mm
C2012202
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012202
ROBUST-BOX WIDTH 120, Vers. II产品已添加到关注清单中
light grey RAL 7035
200x120x60mm
C2012241
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012241
ROBUST-BOX WIDTH 120, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x120x60mm
C2012242
ROBUST-BOX WIDTH 120, Vers, II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012242
ROBUST-BOX WIDTH 120, Vers, II产品已添加到关注清单中
light grey RAL 7035
240x120x60mm
C2016161
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016161
ROBUST-BOX WIDTH 160, Vers. I产品已添加到关注清单中
light grey RAL 7035
160x160x60mm
C2016162
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016162
ROBUST-BOX WIDTH 160, Vers. II产品已添加到关注清单中
light grey RAL 7035
160x160x60mm
C2016241
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016241
ROBUST-BOX WIDTH 160, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x160x60mm
C2016242
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016242
ROBUST-BOX WIDTH 160, Vers. II产品已添加到关注清单中
light grey RAL 7035
240x160x60mm
C2080801
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2080801
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
80x80x40mm
C2080802
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2080802
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
80x80x40mm
C2081201
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081201
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
120x80x40mm
C2081202
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081202
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
120x80x40mm
C2081601
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081601
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
160x80x40mm
C2081602
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081602
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
160x80x40mm
C2082401
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2082401
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
240x80x40mm
C2082402
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2082402
Case shell 80, with groove产品已添加到关注清单中
light grey RAL 7035
240x80x40mm
C2108081
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and botttom, assembly kit
C2108081
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
80x80x80mm
C2108082
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108082
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
80x80x80mm
C2108121
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108121
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
120x80x80mm
C2108122
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108122
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
120x80x80mm
C2108161
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108161
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
160x80x80mm
C2108162
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108162
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
160x80x80mm
C2108241
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108241
ROBUST-BOX WIDTH 80, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x80x80mm
C2108242
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108242
ROBUST-BOX WIDTH 80, Vers. II产品已添加到关注清单中
light grey RAL 7035
240x80x80mm
C2112121
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112121
ROBUST-BOX WIDTH 120, Vers. I产品已添加到关注清单中
light grey RAL 7035
120x120x90mm
C2112122
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112122
ROBUST-BOX WIDTH 120, Vers. II产品已添加到关注清单中
light grey RAL 7035
120x120x90mm
C2112201
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112201
ROBUST-BOX WIDTH 120, Vers. I产品已添加到关注清单中
light grey RAL 7035
200x120x90mm
C2112202
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112202
ROBUST-BOX WIDTH 120, Vers. II产品已添加到关注清单中
light grey RAL 7035
200x120x90mm
C2112241
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112241
ROBUST-BOX WIDTH 120, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x120x90mm
C2112242
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112242
ROBUST-BOX WIDTH 120, Vers. II产品已添加到关注清单中
light grey RAL 7035
240x120x90mm
C2116161
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116161
ROBUST-BOX WIDTH 160, Vers. I产品已添加到关注清单中
light grey RAL 7035
160x160x90mm
C2116162
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116162
ROBUST-BOX WIDTH 160, Vers. II产品已添加到关注清单中
light grey RAL 7035
160x160x90mm
C2116241
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116241
ROBUST-BOX WIDTH 160, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x160x90mm
C2116242
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116242
ROBUST-BOX WIDTH 160, Vers. II产品已添加到关注清单中
light grey RAL 7035
240x160x90mm
C2120301
ROBUST-BOX WIDTH 200, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2120301
ROBUST-BOX WIDTH 200, Vers. I产品已添加到关注清单中
light grey RAL 7035
300x200x80mm
C2121201
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2121201
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
120x120x60mm
C2121202
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2121202
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
120x120x60mm
C2122001
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122001
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
200x120x60mm
C2122002
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122002
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
200x120x60mm
C2122401
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122401
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
240x120x60mm
C2122402
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122402
Case shell 120, with tongue产品已添加到关注清单中
light grey RAL 7035
240x120x60mm
C2124361
ROBUST-BOX WIDTH 240, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2124361
ROBUST-BOX WIDTH 240, Vers. I产品已添加到关注清单中
light grey RAL 7035
360x240x80mm
C2161601
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2161601
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
160x160x60mm
C2161602
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2161602
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
160x160x60mm
C2162401
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2162401
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
240x160x60mm
C2162402
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2162402
Case shell 160, with tongue产品已添加到关注清单中
light grey RAL 7035
240x160x60mm
C2203001
Case shell 200, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2203001
Case shell 200, with groove产品已添加到关注清单中
light grey RAL 7035
300x200x40mm
C2243601
Case shell 240, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2243601
Case shell 240, with groove产品已添加到关注清单中
light grey RAL 7035
360x240x40mm
C2416241
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2416241
ROBUST-BOX WIDTH 160, Vers. I产品已添加到关注清单中
light grey RAL 7035
240x160x120mm
C2416242
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2416242
ROBUST-BOX WIDTH 160, Vers. II产品已添加到关注清单中
light grey RAL 7035
240x160x120mm
C2420301
ROBUST-BOX WIDTH 200, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2420301
ROBUST-BOX WIDTH 200, Vers. I产品已添加到关注清单中
light grey RAL 7035
300x200x120mm
C2424361
ROBUST-BOX WIDTH 240, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2424361
ROBUST-BOX WIDTH 240, Vers. I产品已添加到关注清单中
light grey RAL 7035
360x240x120mm
C2520301
ROBUST-BOX WIDTH 200, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Lid fixing outside of sealed area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2520301
ROBUST-BOX WIDTH 200, Vers. I产品已添加到关注清单中
light grey RAL 7035
300x200x160mm
C2524361
ROBUST-BOX WIDTH 240, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2524361
ROBUST-BOX WIDTH 240, Vers. I产品已添加到关注清单中
light grey RAL 7035
360x240x160mm
C3162401
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C3162401
Case shell 160, with groove产品已添加到关注清单中
light grey RAL 7035
240x160x60mm
C3162402
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C3162402
Case shell 160, with groove产品已添加到关注清单中
light grey RAL 7035
240x160x60mm
C4203001
Case shell 200, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C4203001
Case shell 200, with tongue产品已添加到关注清单中
light grey RAL 7035
300x200x80mm
C4243601
Case shell 240, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C4243601
Case shell 240, with tongue产品已添加到关注清单中
light grey RAL 7035
360x240x80mm
C5203001
Case shell 200, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C5203001
Case shell 200, with groove产品已添加到关注清单中
light grey RAL 7035
300x200x80mm
C5243601
Case shell 240, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C5243601
Case shell 240, with groove产品已添加到关注清单中
light grey RAL 7035
360x240x80mm
C6009121
SMART-BOX WIDTH 90
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6009121
SMART-BOX WIDTH 90产品已添加到关注清单中
light grey RAL 7035
120x90x50mm
C6009161
SMART-BOX WIDTH 90
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6009161
SMART-BOX WIDTH 90产品已添加到关注清单中
light grey RAL 7035
160x90x50mm
C6011141
SMART-BOX WIDTH 110
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6011141
SMART-BOX WIDTH 110产品已添加到关注清单中
light grey RAL 7035
140x110x60mm
C6011201
SMART-BOX WIDTH 110
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6011201
SMART-BOX WIDTH 110产品已添加到关注清单中
light grey RAL 7035
200x110x60mm
C6013161
SMART-BOX WIDTH 130
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6013161
SMART-BOX WIDTH 130产品已添加到关注清单中
light grey RAL 7035
160x130x60mm
C6013221
SMART-BOX WIDTH 130
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6013221
SMART-BOX WIDTH 130产品已添加到关注清单中
light grey RAL 7035
220x130x60mm
C6015181
SMART-BOX WIDTH 150
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims (hinged), assembly kit incl. cover retention
C6015181
SMART-BOX WIDTH 150产品已添加到关注清单中
light grey RAL 7035
180x150x60mm
C6017281
SMART-BOX WIDTH 170
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6017281
SMART-BOX WIDTH 170产品已添加到关注清单中
light grey RAL 7035
280x170x60mm
材料
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
2 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Germany